Hot Sell Pulp Beating Degree Test Equipment Paper Schopper-Riegler Freeness Device

Product Description

 Hot Sell Pulp Beating Degree Test Equipment Paper Schopper-riegler Freeness Device

Product Description

Introduction
The beating degree tester is suitable for measuring all kinds of pulp suspensions not exceeding 100°SR. It can make the most economical use of raw materials, end the beating
process in time during the production process, and serve as a measure of fiber conditions in scientific research. Manual   control, simple operation. The instrument's structural
parameters and technical performance are in line with the
requirements of relevant standards such as QB/T1054-98
"Pulp Beating Tester" and GB/T3332-1982 "Method for
Determination of Pulp Beating Degree (Schober-Rieger
Method)". This instrument can accurately measure the pulp beating degree (beating degree) so as to make the most
economical use of raw materials and end the beating
process in time during the production process. As a measure of fiber conditions in scientific research work, the beating
degree tester is an indispensable tool.

Working Principle
Under normal circumstances, the higher the beating degree of pulp or the more severe the pulp is
crushed, the lower the drainage rate of pulp. This tester is designed based on this phenomenon.
Weigh 2 grams of absolutely dry pulp from which water has been removed, add 1000 ml of water, stir and evenly pour into the instrument. Due to the effect of the copper mesh in the instrument, the fibers remain on the mesh and the water is removed, flowing into the measuring cylinder below the tube
through the side tube and the straight tube below. Due to the different beating degrees of the pulp, the drainage speed is different, and the amount distributed in the side tube and the straight tube
measuring cylinder below is also different. If the pulp beating degree is high, the drainage speed is low, and more water flows into the measuring cylinder below the straight tube. Otherwise, less water flows  into the straight tube. It is stipulated that the amount of water flowing out from the side tube represents  the beating degree.

Product Parameters

Measuring range	0-100°SR
Graduation value	1°SR
Test distilled water temperature	20±0.5°C
Test distilled water volume	1000ml
Drain time	149±1s
Overall dimensions	460*250 mm
Bottom surface and supporting steel rods Material	stainless steel

Detailed Photos

 

 

Company Profile

Located in Chongqing (one of the four municipalities directly under the Central Government of China), the electromechanical manufacturing center in Southwest of China. We specialize in the research, development, production and sales of oil filtration equipment, oil analyzers and electrical testing equipment.

With 15 years of industry experience, we possess an independent R&D center and a complete technology-production-quality control system to ensure that products meet customers' requirements. The products are widely used in manufacturing, energy, transportation, construction and other industries, serving equipment maintenance and quality inspection scenarios. Up till now, we have established long-term cooperation with domestic and foreign customers in more than 100 countries.

Certifications

Packaging & Shipping

Other Testers

 

General Petroleum Products Testers 

1. 1. Karl Fisher Oil Water Content Tester  
   2.Digital Oil Moisture Meter 
   3.Petroleum Products Kinematic Viscosity and Viscosity Index Tester 
   4.Digital Kinematic Viscosity Meter
   5. Fully Automatic Petroleum Products Acidity Meter
   6.Cleveland Open Cup Flash and Fire Point Tester
   7.Pensky-Martens Closed Cup Flash Point Tester 
   8.Pour Point and Cloud Point Tester
   9.Petroleum Products Density Meter
   10.Copper Corrosion Tester 
   11.Petroleum Products Aniline Point Tester 
   12.Petroleum Products Colorimeter
   13.Petroleum Products Carbon Residue Tester (Micro Method) 
   14.Petroleum Product Vapor Pressure Tester (Reid Method) 
   15.Total Acid Number and Total Base Number TAN/TBN Tester 
   16.Petroleum Products X-ray Fluorescence XRF Sulfur Analyzer Sulfur 
   17.Petroleum Products Online Moisture Meter 
   18.Online Moisture ppm Meter/ Particle Counter/ Pollution Degree Analyzer
   19.Petroleum Products Saponification Number Tester 
   20.Micro Coulometry Sulfur and Chlorine Content Tester 
   21.Ultraviolet Fluorescence Sulfur Analyzer 
   22.Conradson Method Petroleum Products Carbon Residue Tester
   23.Ramsbottom(Electric Furnace) Method Petroleum Products Carbon Residue Tester 
   24.Hydrogen Sulfide in Liquefied Petroleum (LP) Gases Tester (Lead Acetate Method)
   25.Hydrocarbon Types in Petroleum Products Tester by Fluorescent Indicator Adsorption

1. 2.Lube Oil Testers 
   1. Anti-rust Grease Salt Spray Corrosion Tester 
   2.Lube Oil Air Release Value Tester
   3.Petroleum Products Demulsification/Water Separability Tester 
   4.Vehicle Gear Oil Channel Point Tester 
   5.Lube Oil Oxidation Stability Tester (Rotary Oxygen Bomb Method)
   6. Lube Oil Foaming Characteristics Tester 
   7.Petroleum Products Ash Content Tester
   8.Petroleum Products and Additives Mechanical Impurity Tester 
   9.Liquid Phase Corrosion/ Rust Preventing Characteristics Tester
   10.Automatic Lubricating Oil Grease Four-ball Friction Tester 
   11.Lubricating Grease Sulfated Ash Content Tester 
   12.Water Content Tester by Distillation 
   13.Petroleum Products Water Soluble Acid and Alkalis Tester
   14.Engine Oil CCS Cold Cranking Simulator/Apparent Viscosity Tester
   15.Noack Method Lubricating Oil Grease Evaporation Loss Tester
   16.Lubricating Oil Grease Evaporation Loss Tester
   17.Lubricating Oil Insolubles Tester
   18.Inhibited Mineral Oils Oxidation Characteristics Tester
   19.Dropping Point Tester of Lubricating Grease Over Wide Temperature Range
   20.Pressure Differential Scanning Calorimetry (PDSC) Lubricating Oil Oxidation Induction Time Tester
   21.Lubricating Grease Dropping Point Tester
   22.Lubricating Grease Cone Penetration Tester
2. Insulating Oil/Transformer Oil Testers 
   1. Karl Fisher Transformer Oil Water Content Tester
   2.Digital Oil Moisture Meter
   3.Automatic Transformer Oil Kinematic Viscosity and Viscosity Index Tester
   4.Automatic Transformer Oil Kinematic Viscosity Meter
   5.Transformer Oil Acidity Meter
   6.Transformer Oil Cleveland Open Cup Flash and Fire Point Tester
   7.Manual Type Transformer Oil Cleveland Open Cup Flash and Fire Point Tester
   8.Transformer Oil Pensky-Martens Closed Cup Flash Point Tester 
   9.Manual Type Transformer Oil Pensky-Martens Closed Cup Flash Point Tester
   10.Transformer Oil Pour Point and Cloud Point Tester
   11.Transformer Oil Density Meter
   12.Digital Transformer Oil Density Meter
   13.Transformer Oil Colorimeter
   14.Transformer Oil Breakdown Voltage/ Dielectric Strength Tester
   15.Dielectric Loss/ Volume Resistivity Tester/Tan Delta/ Power Factor Tester
   16..Fully Automatic Interface/ Surface Tensiometer
3. Transformer Tester
4. 1.Transformer Turn Ratio Tester
5. 2.Winding Resistance Tester
6. 3.Transformer Load And No-load Tester TLNT
7. 4.Transformer Turn Ratio Meter SP-T300
8. 5.Capacitance and Dissipation Factor Tester /TanDelta Tester

FAQ

Q1: Why Choose Super Mechanical?

(1).Exported to more than 90% Countries
(2).Turn-key Solution is no problem

Q2: Is OEM,ODM service available?
Most of the products are available for OEM customization.

Q3:What's kind of Payment terms for customer choosing?
Cash,T/T ,Western Union, Money Gram , Credit Card, Paypal , L/C ...

Q4:Can online video inspection before shipment?
Absolutely no problem

Q5: what's the MOQ ?
MOQ: MOQ can accept 1set

Q6:What's kind of shipment for customer choosing?
Transported by DHL, UPS, Fedex, Air freight,sea freight.
We can also provide reasonable solutions according to your transportation requirements

Q7.What kind of services can you provide?
Online support through email, telephone, Whatsapp or other communication method; onsite taining and installation if you need; filed maintenance and repair, technical video support, etc.